Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FXO SNMP

Can I reset an FXO using SNMP MIB?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: FXO SNMP

Yes.

From the CISCO-VOICE-ANALOG-IF-MIB:

-- The ifEntry for an Analog Voice Interface supports the

-- ifGeneralInformationGroup of Cisco IF-MIB.

Hence if you change the IfAdminStatus from up to down to up again, you will have reset the voice port.

Note, that if the FXO port got stuck because of a software bug, the above operation doesn't guarantte it will resume working.

Hope this helps, please rate post if it does!

5 REPLIES
Hall of Fame Super Gold

Re: FXO SNMP

Yes.

From the CISCO-VOICE-ANALOG-IF-MIB:

-- The ifEntry for an Analog Voice Interface supports the

-- ifGeneralInformationGroup of Cisco IF-MIB.

Hence if you change the IfAdminStatus from up to down to up again, you will have reset the voice port.

Note, that if the FXO port got stuck because of a software bug, the above operation doesn't guarantte it will resume working.

Hope this helps, please rate post if it does!

New Member

Re: FXO SNMP

Hi, thanks for the answer, do you've any example to explain how do I use this?

Hall of Fame Super Gold

Re: FXO SNMP

You need a network management platform, insert the right OID as indicated by the MIB for the right interface, change status to down and up again. The details of operation depends on the network management platform used.

New Member

Re: FXO SNMP

Hi,

I use this method and works...

Index of FXO

snmpwalk -c public -m CISCO-VOICE-ANALOG-IF-MIB.txt 192.168.0.100 .1.3.6.1.4.1.9.9.62.1.3.2.1.1

.iso.3.6.1.4.1.9.9.62.1.3.2.1.1.3 = 1

.iso.3.6.1.4.1.9.9.62.1.3.2.1.1.4 = 1

.iso.3.6.1.4.1.9.9.62.1.3.2.1.1.5 = 1

.iso.3.6.1.4.1.9.9.62.1.3.2.1.1.6 = 1

Down the FXO

snmpset -c public -m CISCO-VOICE-ANALOG-IF-MIB.txt 192.168.0.100 .1.3.6.1.2.1.2.2.1.7.3 i 2

UP de FXO

snmpset -c public -m CISCO-VOICE-ANALOG-IF-MIB.txt 192.168.0.100 .1.3.6.1.2.1.2.2.1.7.3 i 1

Thanks for your time.

Hall of Fame Super Gold

Re: FXO SNMP

Glad to know it worked, thanks for the nice rating and good luck!

765
Views
5
Helpful
5
Replies
CreatePlease to create content