Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

FXO versus FXO

Good morning

I have a problem with FXO port, a client has tree locations A (central), B and C all with 1750 routers and with FXO in each router/place, the B location gets to talk with A, and the C location gets also to talk with A, B ALSON GETS WITH C AND VICE-VERSA, BUT when we off the call , the canal to stay ocupied and only disconnect if we retired the cables of the FXO ports of any one of locations (B or C).

The PBXs has the Intelbrás Standard and are iguals in B and C locations. In the central (A) the PBX is a different model. The configuration is igual, the IOS too( c1700-sv8y-mz.122-11.T1.bin)... very strange

Thanks, Elvecio

1 REPLY
Silver

Re: FXO versus FXO

You are probably running into the fxo disconnect problem.

http://www.cisco.com/en/US/partner/tech/tk652/tk653/technologies_tech_no

te09186a00800ae2d1.shtml

My suggestion is to get the FXO M1 card.

Taimoor

95
Views
0
Helpful
1
Replies