Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

fxs blade problems modem negotiation

I have modems connected to the pots ports of fxs blade in cat 6509 somtimes when I dial another modem it keeps trying to negotiate connection.Other times they connect straight away.

Is there any settings that need to be tweaked to fix this.

2 REPLIES
Cisco Employee

Re: fxs blade problems modem negotiation

It really depends on with the 6624 is talking to. What gateway are you using to go to the pstn or where ever you are trying to establish with the modem. You will want to get on the lastest loads for the 6624 but it really might not help depending on the other deivce. If it is 6608 and that is also on the latest loads you should be good to go.

Thank you,

-Mckee

New Member

Re: fxs blade problems modem negotiation

We are useing CM 3.13a spc gateway being used is Digital Access WS-X6608 D00403010043.Analog Access WS-X6624 is uesing A00203010037.

Thanks

116
Views
0
Helpful
2
Replies
CreatePlease to create content