Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

FXS ports and Avaya PBX

We are looking to provide anaolog lines to a remote location using FXS ports and an Avaya S8700 PBX.

Can we use our CLAN boards as an H.323 gateway and if so how?

Is the only option to have FXS ports on both sides with analog trunks back to the PBX?

Thanks in advance!

2 REPLIES
Silver

Re: FXS ports and Avaya PBX

Bronze

Re: FXS ports and Avaya PBX

Jason, since you already have an Avaya s8700 the easiest thing to do would be to drop an avaya gateway(h.323 or h.248) at the remote site off the s8700"clan". Depending on how many analog lines you are looking for. Avaya has the low cost MultiVoip h.323 gateways and then they have their Gxxx h.248 series gateways which provide greater scalability, resources, apps(G150 or G250).

http://www.avaya.com/gcm/master-usa/en-us/products/offers/multitech.htm&View=ProdResources

373
Views
0
Helpful
2
Replies