We had problems initially but found a work around; We used a Valcom interface between the legacy intercom and our FXS (we run the ICS7750 chasis), assigned an extension to the proper port on the FXS and all works fine. The audio quality of the intercom/OHP is actually clearer than before.
The Valcom device we used is the V-9970, single zone one-way station level page control device. It costs about 300 dollars US. Hope this helps......
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...