Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

G729 Question

This might be a call manager question not sure - but we have a remote site connected to our call manager via a T1 connection between a 3662 router on the main site end where unity is and a 2621 on the remote end.<br><br>The remote site is set to G711 inside it's region, and G729 to the region here at the main site.<br><br>For all normal call manager functions, hold, calls, etc this works - but the second a remote site tries to forward to Unity it gives about 10 quick double-stutter dialtones and kills the connection. The remote site uses extensions 71xx and the 3662 in H323 mode takes all incoming calls to the 71xx and applies the g729br8 codec to the - Unity has G729 configured - I was just wondering if there's any logic in the way calls get forwarded to Unity that would require a different accomodation in the 3662 or CM - or if I'm mssing something.<br><br>Unity 3.1.3 - Call Manager 3.1.3(c).<br><br>Thanks!<br><br> - Ken<br><br>Ken Johnson<br>Mgr. Network Services<br>LeTourneau University<br>http://www.letu.edu/

101
Views
0
Helpful
0
Replies