12-26-2005 09:08 AM - edited 03-13-2019 11:40 AM
HOW to force the codec to G729 when using ephones with ccme ?
Solved! Go to Solution.
12-28-2005 01:37 AM
there is no way to make a compressed call with cme.
only g711 is possible from ip-phone to ip-phone if the phones are registered on the same cme router.
greetings
mehmet
View solution in original post
12-26-2005 11:07 PM
Codec is configured at dial peer level. See Configuring VoIP Dial Peers
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a0080080aec.html#wp1287795
Also see Configuring Codec Selection Order in the same chapter.
The codec statement is platform and ios-version specific.
12-27-2005 11:16 PM
with ccme i don't need to configure a dial-peer voice because ephones are connected directly to the gateway (not to a separate callmanager).
even if we configure codec under "dial-peer voice 1 voice" the call is always made with g729
12-28-2005 02:46 AM
thanks for your clear answer.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
