I have got some settings that I found very usefull on the Gamma Fax cards. I wanted to share it with you. The first parameter is how long the fax card waits before it times out to receive the second digit. The second is the total time that card will wait to recieve the whole digits,<br>HKEY_LOCAL_MACHINE\SOFTWARE\GammaLink\gfaxcfg\channel 1: Key: GFXDTMFTIMEOUT<br> <br>default 5 10<br>5 = Max time between digits<br>10 = total time that it will accept digits<br><br><br><br>Sean Poure<br>NEC-Voice Engineering<br>Sr. Systems Engineer<br>714 4846275<br>
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...