Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Gatekeeper CAC and CM 3.3

Is anyone using a gatekeeper in conjunction with CallManager 3.3 for limiting the number of active calls between IP Phones in a single site (gatekeeper zone)? There are no WAN segments involved at this time, it's essentially just the CallManagers registering with the gatekeeper to limit the calls on the LAN. I've looked through a number of documents but none of the configs I've tried seem to work.

The customer specifically wants to use a gatekeeper for this function rather than the Location bandwidth setting in CallManager. The goal is to prove it works in a single site, then expand to multiple sites.

1 REPLY
Silver

Re: Gatekeeper CAC and CM 3.3

For configuring Cisco Gatekeeper zone bandwidth, use the following commands:

bandwidth {interzone | total | session} {default | zone zone-name}

max-bandwidth

bandwidth remote max-bandwidth

Also use the "show gatekeeper zone status"

http://www.cisco.com/en/US/tech/tk652/tk701/technologies_white_paper09186a00800c5f67.shtml#bw_mgmt

82
Views
0
Helpful
1
Replies
CreatePlease login to create content