I am having problems getting H.323 video calls to route out to the PSTN using a Cisco IP/VC 3527 ISDN Gateway. I have the ISDN Gateway configured with a service prefix of 82 to route calls out to the PSTN with the correct video settings. However, when I dial 82xxxxxxxxxx (where xxxxxxxxxx is the full PSTN number) on the video endpoint, the calls do not get routed to the ISDN Gateway, instead they go to my CallManager, which is configured as the default gateway on the gatekeeper.
My IOS gatekeeper configuration is:
zone local gk1.mydomain mydomain.com
zone remote va1.mydomain mydomain.com 10.4.0.147 1719
zone prefix va1.mydomain 79*
zone prefix gk1.mydomain 82..........
gw-type-prefix 1#* default-technology
lrq forward-queries add-hop-count
no use-proxy gk1.mydomain remote-zone va1.mydomain inbound-to terminal
no use-proxy gk1.mydomain remote-zone va1.mydomain outbound-from terminal
no use-proxy gk1.mydomain default inbound-to terminal
no use-proxy gk1.mydomain default outbound-from terminal
I have a secondary gatekeeper (zone va1.mydomain) which has an MCU registered to it, with service prefix 79.
The gatekeeper registrations are:
GATEKEEPER ENDPOINT REGISTRATION
CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...