Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

gatekeeper registration

I configure a gateway in my call manager to register with a gatekeer. The registration is ok. I put a sniffer in the middle and i see a lote of packets exchanged beteween the gateway and the gatekeeper. Those packets are admisson request and admission confirmed. They are always exchange those packets. Is it normal?

3 REPLIES
Cisco Employee

Re: gatekeeper registration

Yes. Review this doc for more information about how gatekeeper works.

Understanding H.323 Gatekeepers

http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a00800c5e0d.shtml

Blue

Re: gatekeeper registration

yes, these are keepalives between the "gateway" and gatkeeper. Their is a "Registration Request Time to Live" and the gatekeeper expects the gateway to send it an RRQ before that time expires and the gatekeeper replies with either an RCF (confirm) or RRJ (reject).

please rate posts.

andy - berbee

New Member

Re: gatekeeper registration

I understand that but i see in my sniffer many many packets and the led in the switch is flashing very fast even with no calls going on. Do you know how many keepalives packets should be by second or minute? Because i think i have too many GRQ and GCF packets.

369
Views
0
Helpful
3
Replies