05-09-2006 12:29 AM - edited 03-13-2019 01:12 PM
We have a cisco-2821 router with vic-4FXO card.
We also have cisco callmanager-4.0 with 7940G IP Phones.
Want to configure gateway router in such a way that it connects to PSTN network and
flow of voice call should be from IP Phones behind CallManager to PSTN network and vice versa.
Pls post the configuration required in the callmanager server and gateway router to achieve this.
Regards
05-09-2006 07:09 AM
Take a look at the following links which describe the configuration for an MGCP gateway.
Configuring the Cisco IOS MGCP Gateway
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008017787b.shtml
Configure MGCP Gateway and FXO/FXS Ports on a Cisco CallManager Server
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008017825e.shtml
Hope this helps. If so, please rate the post.
Brandon
05-09-2006 10:12 AM
Since you are using FXO lines, its better to use H323, as MGCP doesnt support callerid.
05-10-2006 01:55 AM
Hi,
Thanx for the info.
regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide