Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

gateway registration with E.164 and H.323 addresses

I have central gatekeeper and branch gatekeepers ( router A and B) registered with it.

Two branch routers have identical configurations with relevant differant naming conventions. When I see the gateway status on router A- it has both E.164 and H.323 addresses registered.

routerA#sh gateway

H.323 ITU-T Version: 4.0 H323 Stack Version: 0.1

Gateway gw_120 is registered to Gatekeeper gk-zone120.test.net

Alias list (CLI configured)

E164-ID 120

H323-ID gw_120

Alias list (last RCF)

E164-ID 120

H323-ID gw_120

H323 resource thresholding is Disabled

When I see the other gateway ( router B)

router B#sh gateway

H.323 ITU-T Version: 4.0 H323 Stack Version: 0.1

Gateway gw_119 is registered to Gatekeeper gk-zone120.test.net

Alias list (CLI configured)

H323-ID gw_119

Alias list (last RCF)

H323-ID gw_119

H323 resource thresholding is Disabled

So , no E.164 ID is appearing for router B.

What is causing the router B to not to have E.164 address registration even with the similar configuratoins ( at branch level as well as gatekeeper level)

1 REPLY
Silver

Re: gateway registration with E.164 and H.323 addresses

Are the gateways running Callmanager express or just regular gateways? Also what is extension 120 on router A? Is there a dial-peer for 120? Are there any dial-peers on router B?

Regards,

Anup

205
Views
0
Helpful
1
Replies
CreatePlease login to create content