09-17-2001 11:19 AM - edited 03-12-2019 12:36 PM
I'm currently testing Cisco gateways work under VocalTec Gatekeeper.
I have 2(two) H323 gateways, all 5350 with dual PRI's connecting to the pstn. All of the gateways are running c5350-js-mz.122-2.XA1
and sh gateway is:
5350#sh g
Gateway 5350 is not registered to any gatekeeper
debug:
%CCH323-2-GTWY_REGSTR_FAILED: Gateway 5350 failed to register with Gatekeeper GK even after 2 retries
Has anyone help?
Andrey V. Kudryashov
System Architect
FELINE NET
09-18-2001 06:09 AM
You may need to open a case for this. The config should have the IP address of the GK and the GK name under the h323 interface. You will need a VOIP dial-peer with RAS for the session target and Gateway configured globally. The GK will also need to know the info for the GW. Use debug RAS to see what is happening. If you need help TAC may be your next step.
11-07-2001 09:50 PM
Hi,
Can u pass the configuration of the gateways and gatekeeper. I might be of some help to u.
11-08-2001 03:36 AM
you will need also to synchronize the time clock between the gw and the gk, they must be at the same time zone and so on...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide