Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

GK, H323, GW and remote zone bandwidth counter

Could you assist me with the following problem:

On our GK we have registred two zone:

GK-Ukraine - 4 endpoint (GW only)

and

Primus - 1 endpoint (GW only)

On the GK installed IOS 12.2.2(xb3)

We use it version with GKTMP.

All work normally but some time happend strange thing

when we have active only 225 calls the bandwith counter show 69504 kbps.

As result if we switch on remote zone restriction it fail after some time and our GK stopped

provide service our custoners.

Detailed info from GK below:

=====================================

VoIP-GK1-Kyiv#sh gat st

Gatekeeper State: UP

Load Balancing: DISABLED

Flow Control: DISABLED

Zone Name: GK-Ukraine

Zone Name: Primus

Accounting: DISABLED

Security: DISABLED

Maximum Remote Bandwidth: unlimited

Current Remote Bandwidth: 69504 kbps

Current Remote Bandwidth (w/ Alt GKs): 69504 kbps

VoIP-GK1-Kyiv#sh gat st cl

CLUSTER INFORMATION

===================

Active Endpoint Last

Hostname %Mem %CPU Calls Count Announce

-------- ---- ---- ------ -------- --------

VoIP-GK1-Kyiv 15 2 225 5 Local Host

No other local cluster information is available.

=======================================

1 REPLY
Anonymous
N/A

Re: GK, H323, GW and remote zone bandwidth counter

you need to look at the maximum bandwidth and current total at any

given time, this is how GK determines if there's enough

bandwidth for a call to be made.

87
Views
0
Helpful
1
Replies