Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Silver

Group DS0's from multiple trunks

AS5400-HPX and multiple TDM carriers entering my VoIP network via CT3. I know that using trunk grouping feature I can group trunks, ie, full T1's, and assign the trunk group to dial-peers and do whole lot of stuff.

What I am looking for is, if there is a way to group say 5- ds0 from say 10- T1's together into a group, and use that group into a dial-peer?

Thanks,

Partha

2 REPLIES
Silver

Re: Group DS0's from multiple trunks

Silver

Re: Group DS0's from multiple trunks

Yeah, I figured it out. Below is a sample example. However, we can do it only with CAS trunks. Is there a way to accomplish this in a PRI?

controller T1 7/1

framing esf

linecode ami

ds0-group 1 timeslots 1-4 type e&m-fgb dtmf dnis

ds0-group 2 timeslots 5-8 type e&m-fgb dtmf dnis

ds0-group 3 timeslots 9-12 type e&m-fgb dtmf dnis

ds0-group 4 timeslots 13-16 type e&m-fgb dtmf dnis

ds0-group 5 timeslots 17-20 type e&m-fgb dtmf dnis

ds0-group 6 timeslots 21-24 type e&m-fgb dtmf dnis

cas-custom 1

trunk-group 11

cas-custom 2

trunk-group 11

cas-custom 3

trunk-group 11

cas-custom 4

trunk-group 11

cas-custom 5

trunk-group 11

cas-custom 6

trunk-group 11

108
Views
4
Helpful
2
Replies
CreatePlease to create content