Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

H.323 - FXO Config with 12.3 IOS - CCM 4.1

Could anyone point me in the right direction of an example configuration for the above? Or share theirs?

MGCP is successful, but does not support caller-id on the FXO-M1 cards. So it must be changed to H.323

Thanks in advance.

4 REPLIES
New Member

Re: H.323 - FXO Config with 12.3 IOS - CCM 4.1

This may help you, it is clsoe to what you want

http://www.cisco.com/en/US/customer/tech/tk1077/technologies_configuration_example09186a008009431b.shtml

p.s: rate the posting if it helps

New Member

Re: H.323 - FXO Config with 12.3 IOS - CCM 4.1

Thank you for the response. The link did not really help me, but pushed me in the right direction.

There is a config here which is not completed related but has the dial-peer's and voice ports configured which was valuable. Got it working.

http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme32/cipce/9cfgex.htm

Thanks

New Member

Re: H.323 - FXO Config with 12.3 IOS - CCM 4.1

We are trying to do the same thing. Could you share your gateway config?

Thanks

New Member

Re: H.323 - FXO Config with 12.3 IOS - CCM 4.1

Hi there, here is the config from my 1760 router. 4999 could be any hunt pilot, cti route point or DN.

196
Views
3
Helpful
4
Replies
CreatePlease to create content