Cisco Support Community

H323 and Calling Party Name in Facility IE

Anyone heard a status update on when Calling Party Name will be fixed for H323? We are using T.38 for faxing which doesn't work with XMedius in MGCP.

CallManager doesn’t use the Facility I field in an ISDN message for caller ID. They use the Display I field. TAC suggests getting the telco to change it but the telco will tell you they cannot. I opened a TAC case on this in 2001 and had a ddts. The router gets the caller name fine and you can see this if you do a debug voice ccapi inout, but Call Manager doesn’t process it in the Display I field. Call manager does not support the Caller Name coming in on the Facility I field:

Facility i = 0x9F8B0100A10F02015706072A8648CE1500040A0100

Progress Ind i = 0x8283 - Origination address is non-ISDN

Calling Party Number i = 0x2183, '7046463196'

Plan:ISDN, Type:National

Called Party Number i = 0x80, '2543'

0x9F8B0100A10F02015706072A8648CE1500040A0100 when converted to ascii is Jim, Cook.


Re: H323 and Calling Party Name in Facility IE

if you are using H.323 you can only use Display IE.

CreatePlease to create content