Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

H323 and static nat

Hi all,

this is the situation: one centrale site and one remote site. Each site has a Gatekeeper and several IP Phones. The two sites are connected through a vpn. Five subnets of the remote site must be able connect to two of the networks of the central site, in order to make and receive calls. Unfortunally, some of the remote site's subnets are in overlap with other central site's subnets.

So I thought to statically nat the subnets in overlap in the remote site. I know that Cisco routers and firewall support nat with h323, but I'm not sure this will work in this situation, can you give me some confirmation?

Thanks

Matteo

1 REPLY
Silver

Re: H323 and static nat

you can use debugging commands ,try this document for more information

http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_feature_guide09186a0080080535.html#1021717

189
Views
0
Helpful
1
Replies
CreatePlease to create content