Hi,
If you had dial-peers with explicit matches you could do this it Could be a lenghty process configuring a the dial-plan with your requirement.
Definetly needs thought.
Some ideas..
Forward digits command on dial-peer could be of some benifet for example
forward-digits 7 & destination patern 99..... this would match anything with 7 digits or mor startingi with 99.
This would help to reduce the number of dialpeers required.
Another thought..
I like this method I havnt tried it though.
You could also try useing the num-exp to tranform the number to something that would be null i.e. match nothing this should work.
An example a 6 digit number hits the H.323 GW gets transformed to 333522222 and wont match a dial-peer
so the call will fail.
num-exp 5..... 333......
Because the 6 digit numbers wouldnt match anything..
If you have CM its a different story you could just not route 9.XXXXXX explicit match !!
Block this pattern.
You could also use CoR on the h.323gw this is pretty cool.Though every dial-peer needs configuration otherwise the call is allowed.
Let us if you want to block all 6digit numbers or perkhaps only ones start with 5
If you want to know more let us know.
It really depends on your HW/SW as to what you can and cant achieve.
Let us know how you get on.
Give it a try
Allan
