Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HDMI behaviour after standby period of C20

Dear All,

Why the C20 terminal provides a black video on my video capture card after standby period of C20 ?

Have you any suggestions to solve this problem ??

Thanks in advance

Emmanuel

Everyone's tags (2)
3 REPLIES
Cisco Employee

Re: HDMI behaviour after standby period of C20

Hi,

Do you mean the c20 hdmi output 1 is connected to the video capture card or the camera is connected directly to the video capture card?

Also, do you mean that when you wake up the system from the standby mode, your video capture card gets black video?

Regards

Sent from Cisco Technical Support iPhone App

New Member

Re: HDMI behaviour after standby period of C20

Hi Teck Chye Tang,

Thanks for your answers.

Do you mean the c20 hdmi output 1 is connected to the video capture card  or the camera is connected directly to the video capture card? Yes, with a BlackMagic video card.

Also, do you mean that when you wake up the system from the standby mode, your video capture card gets black video ?

Yes, It's exactly the case.

Regards

Emmanuel

Cisco Employee

Re: HDMI behaviour after standby period of C20

Hi,

Firstly, use the latest software release if you are not doing so and check if you still have this issue.

Secondly, you can telnet to the codec and check if the codec is getting input from the camera on HDMI 1 after waking up.

or rather connect the codec diretly to a display screen and see if you have this issue.

641
Views
0
Helpful
3
Replies