Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

HELP ISDN BRI point-to-point

HELP,

I have 3 ISDN-2 (BRI, 64k) connections on 3640 router for Voice.

After a while the ports come up, but if I make a call, it disconnects after excactly 17 sec. But after removing the static tei, it keeps working fine for a while...????

IOS: 12.2(8)T4

config;

BRIx/x

no ip address

isdn static tei 1

isdn point-to-point-setup

isdn twait-disable

isdn incoming-voice voice

isdn map . plan unknown type unknown

on L2, I see TEI1 TEI assigned and TEI0 Multiple frame established

Please Help me out, it MUST work monday !!!

regards,

Sascha

2 REPLIES
New Member

Re: HELP ISDN BRI point-to-point

you might consider using : c3640-is-mz.dk66722new.dk66722

this is a fixed version made for NL

any Q's please call me @ +31 402502772

Re: HELP ISDN BRI point-to-point

Thanks,

But I have got it working now, these were the most important settings;

BRI1/0

isdn static tei 0

isdn point-to-point-setup

Thanks for replying.

Sascha

170
Views
0
Helpful
2
Replies
CreatePlease to create content