Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

HELP : Problem with IPVC 3525 and remote ISDN clients.

We have a problem with the installation of a custumer.

We use an IPVC 3525 Gateway and a 3510 MCU.

The 3525 PRI is connected to an E1 (France).

There is no problem with lan clients to make multipoint Visio-Conference : 6 clients at 384 kbps.

And no problem to make a VC with 2 remote clients at 384 kbps and 1 lan client at 384 kbps.

But it is impossible to make a VC with 3 remote clients at 384 kbps : the 3rd client cannot connect.

2 remote clients at 384 kbps + 1 remote client at 256 kbps is not working anymore.

2 remote clients at 384 kbps + 1 remote client at 128 kbps is working !!!

And 3 remote clients at 256 kbps is working !!!

Thanks for your answers,

Mickael

1 REPLY
Community Member

Re: HELP : Problem with IPVC 3525 and remote ISDN clients.

Please open a case with the Cisco TAC on this matter if you have not already done so.

96
Views
0
Helpful
1
Replies
CreatePlease to create content