Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

HELP with config please !!

Hi,

I am trying to implemente IVR in a cisco AS5300. I have loaded the scripts,and audio files into the AS5300. My problem is how to configure the user file in my RADIUS Server. Fro example, the IVR ask for account (12345) and password (12345), should I add in my users file:

12345 Password "12345"

Service-Type = Framed-User;

..etc,

are this account and password correct ??

1 REPLY

Re: HELP with config please !!

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

95
Views
0
Helpful
1
Replies
CreatePlease to create content