Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Here is how to get port 2 of ATA to register to Call manager.

THis is the link on Cisco.com:

http://www.cisco.com/warp/public/788/voip/ata_sccp.html

See step 6 in this section:

Manually Configure Cisco CallManager 3.0, 3.1 or 3.2 to Recognize the ATA 186

This is the procedure:

Use the following procedure to add the second port on the Cisco ATA 186 to CallManager.

1) Drop the first 2 nibbles of the MAC address and shift the MAC address to the left, then add 01 to the right end of the MAC address.

2) For example 00070EA26032 is port 1 and 070EA2603201 is port 2.

3) Use this new MAC address from above to add it to Cal Manager.

117
Views
0
Helpful
0
Replies
CreatePlease login to create content