Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

HI All, I have a SX10 telepresence unit with CUCM 10.x and 2911 router with 3rd Generation cards. Is it possible to make video

Hi All,

 

HI All,  I have a SX10 telepresence unit with CUCM 10.x and 2911 router with 3rd Generation cards. Is it possible to make video call or conference over E1 PRI.

3 REPLIES

I'm willing to be corrected,

I'm willing to be corrected, but most likely your PRI was purchased for voice only.  If that's true then, no.  You will need some sort of data transmission medium to pass both audio and video over.  A PRI can be used for that, or BRI, but most likely, the PRI you are talking about is your PSTN circuit and not a data one.

Anthony Holloway

Please use the star ratings to help drive great content to the top of searches.
New Member

Yes, my PRI is a PSTN circuit

Yes, my PRI is a PSTN circuit not a data one. But i have confirmed with ISP that my PRI circuit is capable of handling both voice and data.

VIP Purple

Hi , I suggest reading the

Hi ,

 

I suggest reading the link which says what all Video endpoints are supported by ISR G2 and also speak to Cisco SE /AM for more details.

 

http://www.cisco.com/c/en/us/products/collateral/unified-communications/voice-video-conferencing-isr-routers/qa_c67-649850.html

regds,

aman

110
Views
0
Helpful
3
Replies
CreatePlease to create content