06-04-2003 06:04 AM - edited 03-13-2019 12:11 AM
Hello,
I'm trying to hide DN's on internal calls: when I call to another DN on the lan, that DN would not see my DN.
Is this possible? I have a callmanager 3.3(2).
Thanks in advance.
Solved! Go to Solution.
06-04-2003 07:34 AM
Hello,
Here what I did on my 3.2(2c) CCM. Assuming you want to hide DN 6001 when calling 6002. (work with 2 phones first) Create (new) Partition A, Partition B, and Partition C. Create Calling Search Space CSS1, which contains Partition C Create Calling Search Space CSS2, which contains Partition B. Put DN 6001 in Partition A.
Put DN 6002 in Partition B.
Don not assign any Call Search Space.
(do updates and reset the phones)
Make sure 6001 cannot call 6002.
Create a Translation Pattern:
Translation Pattern = 6XXX
Partition = Partition C
Calling Search Space = CCS2
Calling Party Translation Mask = 1111 (Or what you want to see in CID)
Discard Digits =
Called Party Transformation Mask = 6XXX
Now assign CCS1 to DN 6001
(do updates and reset phone)
Make a call from 6001 to 6002.
That should do it.
06-04-2003 07:09 AM
Hi
You can do this by using translation patterns that manipulate the calling party number, in the 'Calling Party Transform Mask' section of the translation pattern configuration page.
Regards.
06-04-2003 07:35 AM
Hi,
I'm trying to do a translation pattern, with the option 'Use Calling Party's External Phone number Mask' selected and 'Calling party presentation' Restricted. I'm still seeing the DN when I call from an IP phone to other.
Do I need to put a 'Calling Party Transformation mask' or can I have a Partition/CSS problem?
Thanks.
06-04-2003 07:34 AM
Hello,
Here what I did on my 3.2(2c) CCM. Assuming you want to hide DN 6001 when calling 6002. (work with 2 phones first) Create (new) Partition A, Partition B, and Partition C. Create Calling Search Space CSS1, which contains Partition C Create Calling Search Space CSS2, which contains Partition B. Put DN 6001 in Partition A.
Put DN 6002 in Partition B.
Don not assign any Call Search Space.
(do updates and reset the phones)
Make sure 6001 cannot call 6002.
Create a Translation Pattern:
Translation Pattern = 6XXX
Partition = Partition C
Calling Search Space = CCS2
Calling Party Translation Mask = 1111 (Or what you want to see in CID)
Discard Digits =
Called Party Transformation Mask = 6XXX
Now assign CCS1 to DN 6001
(do updates and reset phone)
Make a call from 6001 to 6002.
That should do it.
06-19-2003 05:18 AM
Hi, I have done test with that configuration and it works fine.
Thank you very much.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: