I just got a 2801 with SRST and need to add it as a voice gateway to Call Manager 4.0. I can add it easily enough as a H.323 gateway, but I would like to add it as a MGCP Gateway (I have no experience with H.323. For that matter I have no experince with MGCP, but it seem like the easier route.)
However, 2801 router is not an option from the dropdown box on the "Add a gateway" screen in Call Manger. Can anyone point me in the right direction?
Which version of CallManager are you running exactly? It looks like 4.0(2)sr1 and 4.1(2)sr1 will have support for 2801. If you cannot upgrade at this time, you can select 2600 in place of 2801 for the MGCP Gateway as a work around.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...