Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How can I Clear the counters for the command "sh dial-peer voice xx" ?

some time is usefull put in "zero" the counters how can i do that?

7200_TLALPAN_VOZ#sh dial-peer voice 166

VoiceOverFRPeer166

information type = voice,

description = `',

tag = 166, destination-pattern = `66',

answer-address = `', preference=0,

numbering Type = `unknown'

group = 166, Admin state is up, Operation state is up,

incoming called-number = `', connections/maximum = 0/unlimited,

DTMF Relay = disabled,

modem passthrough = system,

huntstop = disabled,

in bound application associated: 'DEFAULT'

out bound application associated: ''

dnis-map =

permission :both

incoming COR list:maximum capability

outgoing COR list:minimum requirement

type = vofr, session-target = `Serial2/2:1 26',

called number = `',

session-protocol = cisco-switched,

fax-rate = 7200, payload size = 20 bytes

fax NSF = 0xAD0051 (default)

codec = g729r8, payload size = 30 bytes,

signaling-type = cas,

VAD = disabled,

Voice Sequence Numbers = disabled,

voice class perm tag = `'

Time elapsed since last clearing of voice call statistics never

Connect Time = 11707, Charged Units = 0,

Successful Calls = 5, Failed Calls = 6, Incomplete Calls = 0

Accepted Calls = 0, Refused Calls = 0,

Last Disconnect Cause is "15 ",

Last Disconnect Text is "call rejected (21)",

Last Setup Time = 54031449.

3 REPLIES
New Member

Re: How can I Clear the counters for the command "sh dial-peer v

The only way to clear those stats is either

Reload the router

Or

copy the dial-peer to clipboard, delete the dial-peer and reconfigure the dial-peer.

The stats update for each call and the Last Disconnect Cause is always most recent call's disconnect. No other way that I believe you can clear them.

Hope this helps.

New Member

A follow up since this is the

A follow up since this is the first link on Google and the answer below is not correct. It took some looking, but you can clear these.

 

clear statistics dial-peer voice xxx

VIP Purple

Hi, U can refer the link

Hi,

 

U can refer the link

 

https://supportforums.cisco.com/discussion/11478466/trying-reset-dial-peer-counters

 

regds,

aman

760
Views
0
Helpful
3
Replies