Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How can I Integrate Analog-DID Fax board into IP Telephony?

We are adding RightFax to our site. The server is coming with a Brooktrout combo FAX board (2 - Analog ports and 2 - Analog DID ports).

I have no problem with the basic analog ports...just connect them to a FXS port and I am on my way!

My question is "How do I integrate the inbound Analog DID ports into our Cisco IP Telephony system?"

We have a 3745 router with two incoming PRI's. We have a range of DID numbers that we want to route / switch over to the Brooktrout Analog-DID ports when a call comes in for one of them so that the faxes are delivered to individual subscribers inboxes.

What VIC do I need to add to my gateway to accomplish this? We will be passing over four digits to the FAX Server.

Any help will be greatly appreciated.

5 REPLIES
New Member

Re: How can I Integrate Analog-DID Fax board into IP Telephony?

I am looking to do the same thing. Did you ever find out the answer?

Thanks

New Member

Re: How can I Integrate Analog-DID Fax board into IP Telephony?

I don't know that Cisco has a solution for an analog DID connection to a fax board. Cisco's analog DID interfaces are inbound only.

New Member

Re: How can I Integrate Analog-DID Fax board into IP Telephony?

I configured a VG200 to work with the Brook Trout combo card in a RightFax server about two years ago. I believe that I used an FXO for incoming to the analog DID and an FXS for outgoing faxing.

New Member

Re: How can I Integrate Analog-DID Fax board into IP Telephony?

Configure your h323 gateway to send whatever number you want through FXS analog port which is connected to your DID port on FAX board. I didnt test it. Let me know if it works.

Bill.

New Member

Re: How can I Integrate Analog-DID Fax board into IP Telephony?

You can use Brooktrout DID analog cards and VIC E&M's to pass DID info back and forth.

209
Views
0
Helpful
5
Replies