Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How can I to register a ex60 with a CME.

Hello!,

I am registering an EX60 to CME 8.6 as SIP phone, but I dont have audio in both directions, I have audio in two ways only when the call is incoming to EX60. but when the EX initialize the call I haven't audio.

The same result is with video.

The EX60 is supported by CME 8.6 in a router 1861?.

Thanks a lot.

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

How can I to register a ex60 with a CME.

Hi,

EX60 is not supported with CME 8.6.

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/requirements/guide/cme86spc.htm.html

Regards,

Gnaneswaran.

-Pls rate helpful posts

2 REPLIES
Bronze

How can I to register a ex60 with a CME.

Hi,

EX60 is not supported with CME 8.6.

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/requirements/guide/cme86spc.htm.html

Regards,

Gnaneswaran.

-Pls rate helpful posts

New Member

How can I to register a ex60 with a CME.

Hi Gnaneswaran,

Thanks for the response.

Can the EX60 register with a gatekeeper and to work fine?

Thanks again.

759
Views
0
Helpful
2
Replies
CreatePlease to create content