Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

How can I use a 7905 phone on CM 3.1(3a)?

1 REPLY
Cisco Employee

Re: How can I use a 7905 phone on CM 3.1(3a)?

Since 7905 is only supported as a skinny phone starting CCM 3.3.2, the only option you right now is to configure the 7905 in H323 mode, and then set it up as a h323 client in your 3.1(3a) CCM.

You can get the 7905 H323 load in the following link, the zip file includes a few utility which you need to set the phone up.

http://www/cgi-bin/tablebuild.pl/ip-phone-7905

Here are a few additional links for configuring the 7905 in H323 mode.

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/7905_ip/7905admn/7905h323/7905ach4.htm

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/7905_ip/7905admn/7905h323/7905ach3.htm#wp1002608

-ben

83
Views
0
Helpful
1
Replies
CreatePlease to create content