Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How do I get specific rings on other lines

Call Manager 3.3.3 has options for setting unique rings on multiple lines on the same phone. But when I go to select the ring settings for the other lines, I am only seeing 7 different ring types. I would like to be able to select from the main list of rings for each phone line on the phone. Is there a way to do this, or am I limited to the 7?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: How do I get specific rings on other lines

You will need to edit the DistinctiveRingList.xml file in c:\program files\cisco\tftpath. Make it the same as the RInglist.xml file if that is where you have made enteries for additional ringtones. If you are using the dfault rings then just copy and paste the contents from ringlist.xml into DistinctiveRingList.xml.

Then stop and restart the tftp service. It might take a bit due to the tftp path being cached.

Peter

1 REPLY
New Member

Re: How do I get specific rings on other lines

You will need to edit the DistinctiveRingList.xml file in c:\program files\cisco\tftpath. Make it the same as the RInglist.xml file if that is where you have made enteries for additional ringtones. If you are using the dfault rings then just copy and paste the contents from ringlist.xml into DistinctiveRingList.xml.

Then stop and restart the tftp service. It might take a bit due to the tftp path being cached.

Peter

99
Views
0
Helpful
1
Replies
CreatePlease login to create content