Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how do i register 2600 with FXS port with opengatekeeper

Hi all

i have 2600 with 2 fxs ports.

i would like to configure this 2600 router with my opengatekeeper

like fxs port 1 with number 5555

like fxs port2 with number 6666

iam able to register ATA 186 with opengatekeeper using 1111

and iam able to register netmeeting PC with 2222

iam able to call 1111 to 2222 and 2222 to 1111

not i want to configure to call 2222 to 5555 and 6666 and viseversa

but iam not able to get any sample configuration to configure with opengatekeeper

can any one send me the sample configuration for the same

thanks in advance

hari

can some one send me the sample configuration

2 REPLIES
New Member

Re: how do i register 2600 with FXS port with opengatekeeper

Let me make sure I understand your question correctly please.

What is an Opengatekeeper? Is it a 3rd party vendor equipment? If so, then we do not have information on them, we have information on the Cisco equipment. If you need help configuring your cisco 2600 gateway to register to the gatekeeper with E164 registration using numbers 5555 and 6666 then yes we can provide the gateway configuration for you.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t5/h323v2.htm#xtocid249097

(You need to use the register CLI under dial-peer config).

The rest of the gateway config is similar to config below:

http://www.cisco.com/warp/public/788/voip/voip_gw_gk.html

Hope this helps.

New Member

Re: how do i register 2600 with FXS port with opengatekeeper

hi

thanks for your reply, sorry for the delay, i was out of town

the gatekeeper is GNU based, its running on redhat linux

iam able to register with Cisco ATA 186, and make call each other using 5 boxs

now i was i want to register this 2600 router with 2 fxs ports should talk to ATA 186 ports and the same from cisco ATA 186

thanks

153
Views
0
Helpful
2
Replies