Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How do we update the date and time in call mamanger?

The time on the phones is off. What do I look for? Thanks

1 REPLY
Highlighted
Super Bronze

Re: How do we update the date and time in call mamanger?

If you're talking full CallManager, then change the time on your publisher (your CallManagers subscibers should sync to it, and your phones should sync to the CallManager they register to).

If your CallManager services multiple time zones it's a little more involved (but not much).

If you have CME, then you set the time on the router - but it's lost when you reboot. So you're best to set an NTP server:

ntp server x.x.x.x

(if you don't have an NTP box then google for an internet one).

You can also use NTP with CallManager - see this:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008009470f.shtml

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
124
Views
0
Helpful
1
Replies