Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How does work the switch in the IP Phone ?

Hi ,

This is just for an explanation . What is the mechanism of attributing VLAN ( I Know that the phones work with a trank ) on the IP phone . How does it know that they must attrib the data vlan on port 1 and voice vlan on port 2

2 REPLIES
New Member

Re: How does work the switch in the IP Phone ?

Someone correct me if I’m wrong but it’s all data on the wire. It only turns back into voice at the phone. Perhaps I misunderstand the question.

Cisco Employee

Re: How does work the switch in the IP Phone ?

There is a 3 port switch in the back of the phone. When you are using aux vlan the switch in the phone knows to send all of the untag traffic to the pc port and if there is tagged with the voice vlan information it is sent to the phone port. If you are doing aux vlan that information is exchanged via CDP.

Hope this helps,

-Mckee

250
Views
0
Helpful
2
Replies
CreatePlease to create content