Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

How to authentication at VG200 use TCL

Hi all,

i just test cisco debitcard TCL demo on VG200. it works, and i want to know how to authentication the UID+PIN. Does VG200 support Radius or not?

i didn't find the radius config command at it. If it not support Radius, how to authentication the customer when use TCL application ?

Thanks.

1 REPLY
Cisco Employee

Re: How to authentication at VG200 use TCL

It should support Radius:

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps2192/products_programming_reference_guide09186a00800e9a2c.html

Check the feature navigator for the VG200 to be sure....

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1835/products_programming_reference_guide09186a00800b5e17.html

http://www.cisco.com/en/US/partner/tech/tk652/tk701/technologies_configuration_example09186a0080094305.shtml

In a real environment, you would have the username and password stored in a Remote Dial-In User Service (RADIUS) server, and the AAA authentication login H.323 would point to RADIUS, and not local. This would be accomplished with the aaa authentication login h323 group radius command in the config of the router that is running IVR.

94
Views
0
Helpful
1
Replies
CreatePlease to create content