Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to Block Incoming Number on a 2811 4port FXO

Hi All,

First time I have tried to use the Support Community. I have a Customer that is getting calls from a specific number and I wanted to know is there a way to Block a specific number on FXO Ports. The Router is a Cisco 2811 with VIC2-4port FXO. Also this is a MGCP Gateway. Can this be done some how in CLI or is there a solution on Call Manager which is 8.6.1 at the moment.

Thanks in Advance!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: How to Block Incoming Number on a 2811 4port FXO

What version of CUCM do you use? If you have 8.x or newer you can use the route by calling number feature in translation pattern to block calls from a specific number.

Search the CSC for this and you will find posts that discusses how to set this up.

Please remember to rate all useful posts.

Sent from Cisco Technical Support iPhone App

Please remember to rate helpful responses and identify helpful or correct answers.
6 REPLIES
New Member

How to Block Incoming Number on a 2811 4port FXO

Hi Jason,

what about ECC (External Call Control) at CUCM to use in such case?

I can recomend 2Ring PHONE SERVICES for such purposes. There is a feature available which can control the call flow. In other words, it should resolve your need.

Feel free to take a look to the website to get better insight: http://www.2ring.com/NewJuice

Regards,

Martin

Cisco Employee

How to Block Incoming Number on a 2811 4port FXO

This cannot be done on MGCP, the supported method for this is to use H.323 and use translation profiles, see:

https://supportforums.cisco.com/docs/DOC-2907

When using MGCP, you can only use the 'called number' as CUCM does not use the 'calling number' for digit manipulation.

HTH

Christian Nuche.

PDI HD Team.

Re: How to Block Incoming Number on a 2811 4port FXO

What version of CUCM do you use? If you have 8.x or newer you can use the route by calling number feature in translation pattern to block calls from a specific number.

Search the CSC for this and you will find posts that discusses how to set this up.

Please remember to rate all useful posts.

Sent from Cisco Technical Support iPhone App

Please remember to rate helpful responses and identify helpful or correct answers.
New Member

Re: How to Block Incoming Number on a 2811 4port FXO

Thanks Roger, I had just found this DOC myself and was looking into this. I have tried this now and is working great. 8.6.1 BTW. Thanks All for the Input!

Re: How to Block Incoming Number on a 2811 4port FXO

Your very welcome, glad to be able to help out. Thank you for the nice rating.

Sent from Cisco Technical Support iPhone App

Please remember to rate helpful responses and identify helpful or correct answers.
New Member

How to Block Incoming Number on a 2811 4port FXO

Hi Jason,

The requiremen to block selected incomming/Outgoing calls to CUCM can be achieved using MARS Intellicall Application for CUCM ( based on CUCM CURRI)

Application video : http://www.youtube.com/watch?v=k_dqcQ6prhs

Doc: http://www.slideshare.net/pranjol/parsecs-intellicall-application

1157
Views
0
Helpful
6
Replies