Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to change CP-7911 IP Phones logo in CCM 5.0

I want to change the logo of my phone cp-7911. I use CCM5.0. where do I move the .logo file into TFTPPATH directory.

Anybody can help me? thanks

3 REPLIES
Silver

Re: How to change CP-7911 IP Phones logo in CCM 5.0

The image choices that users see come from PNG images and an XML file (called List.xml) that are stored on the TFTP server used by the phone. Refer the following URL

http://www.cisco.com/en/US/products/hw/phones/ps379/products_administration_guide_chapter09186a008069239d.html#wp1088046

New Member

Re: How to change CP-7911 IP Phones logo in CCM 5.0

Thanks for your attention. but There is no List.xml file in CCM 5.0(4a)...

Anybody can help me?

New Member

Re: How to change CP-7911 IP Phones logo in CCM 5.0

Yes there is not one in there by default. You will have to build one and put it in each directory for each size. There is in example in http://www.cisco.com/en/US/products/hw/phones/ps379/products_administration_guide_chapter09186a008069239d.html#wp1088046

An Example is like so (the Image should point to your thumbnail file and the URL should point to you actual Image):

FTP:Desktops/95x34x1/TN-Mountain.png"

URL="TFTP:Desktops/95x34x1/Mountain.png" />

FTP:Desktops/95x34x1/TN-Ocean.png"

URL="TFTP:Desktops/95x34x1/Ocean.png" />

HTH

Shiznic

323
Views
0
Helpful
3
Replies