How to change the calling party no. from 4 digits to 8 digits
Callmanager express is running 12.3(14)T5, all ip phone have 4 digits extension, e.g 2210,2211.
One IDAP(T1) isdn is connected to PSTN network, debug isdn q931 show the calling party no to PSTN is 2210, but PSTN need the whole level ( 8 digits)e.g. 28562210. 2856 is the prefix of the IDAP, user have the level from 28562100 to 28562299. In order to show the correct caller ID to external user(PSTN), the CME should send out the full range in 8 digits.Under the telephony-service, no any commands for this feature.
How can I let the CME to send out the whole range instead of the 4 digits extension??
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...