How to configure an HDV module for 3600 series for modem conections ?
We have 2 3640 routers with one HDV module in both sides. Routers are connected with E1 leased line and HDV's are connected to PBX Meridian. We already have voice and Fax solution using VoFR signaling. We need to deploy modem solution for users, we know about "modem relay" feature in dial-pears configuration.
Re: How to configure an HDV module for 3600 series for modem con
Help me understand this issue a little better so I can try helping you out. For this modem solution you want users to dial-in to the 3600 and access the voice/fax network? Can you describe your layout & objectives in more detail?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...