Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to configure CCME to use g729 codec even on local calls

Dear All,

do you know if it is possible to use g729 codec on local calls (even for phones that are located on the same network).

Thanks

Elias

3 REPLIES
Cisco Employee

Re: How to configure CCME to use g729 codec even on local calls

Not possible, sorry. CME phones will always use G711ulaw when calling amongst other CME phones. CME phones can do G729 if calling out an H.323 / SIP dial-peer configured for G729.

Community Member

Re: How to configure CCME to use g729 codec even on local calls

Totally agree.

It doesn't make sense to use g729 in the LAN, you will not save enough bandwidth taking advantage that you are using Switches that support QoS, and 10/100 Mbps interfaces.

Orlando.

Community Member

Re: How to configure CCME to use g729 codec even on local calls

Thanks for the reply,

but if you use CME over the WAN it makes sense to use G729a

(CCM does it)

Regards

E

118
Views
0
Helpful
3
Replies
CreatePlease to create content