how to configure Voice QOS for 2948G-L3 and 2024XL?
I have a 2948G-L3 as the distribution switch and it connects to 5 other 2924XL-EN. The 2948G-L3 also distributes one VLAN to each of the 5 2924's via trunk ports. The 2948G-L3 also will have 30 ports connect to IP Phones and PC's. Does anyone know how to configure those 30 Phone/PC ports for voice QOS? Do I also need to distribute voice VLAN via the trunk links to the 2924?
Re: how to configure Voice QOS for 2948G-L3 and 2024XL?
Often times complex configuration issues are best addressed in an interactive session with one of our trained technical assistance engineers. While other forum users may be able to help, its often difficult to do so for this type of issue.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...