Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How To Define Dial Plan in ART 1.1(1)SPc

Does any expert know how to define the dial plan under ART 1.1(1)?

I just wants to sort out the dial out number that have at least 10 digits or more.

I sort out the report with the following steps:

Device report>gateway>details>gateway type or dial pattern

The access code for dial out to PSTN is 9.

I tried define the dial plan with the following methods, it doesn't work.

Condition No. of digits Pattern Call type

> 10 9! other

I select the call type other in my report.

The report list the dial out records that include 3 digits, 5 digits and >10 digits

Together, the file size of the report only have 283KB, if the records are very large, it will not be listed. I need run the report per day.

How can I increase this limitation ? or increase the file size of the report by the ART system.

Thanks in advance!!


Re: How To Define Dial Plan in ART 1.1(1)SPc

Not much has been documented on about the dial plan in ART . May be the following documents should help you.

ART Logic: How Calls are Classified

Configuring ART