I have a 7960 (IP-phone) with two 7914 extensions modules on my desk. The phone has a phone number which I can forward using the forward button. But also three other lines (groupsnumbers) which has been created in the central and are not connected to a real phone. The numbers are seperatly defined as incoming phone lines on my 7960.
How can i forward the incoming lines (three phonenumbers) to a mobile device. Is there a key or a combination of key's for??
To the best of my knowledge, the CFwdAll key works only with the primary extension on the telephone. However, you can modify, activate and deactivate the call forward all function for any line that appears on your telephone and/or side car by using the "ccmuser" web gui interface. It's a very easy process.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...