How to get the whole directory/addresses with Cisco JTapi 8.6?
For a program I am developing I need to get the whole directory/addresses of the Call Manager. What I need is to get the description and telephone numbers of all the numbers in the Call Manager directory.
My application controls a limited amount of the telephones registered within the Call Manager, but I need to provide the whole directory listing (so that the user can call to the telephone numbers even if the program doesn't control that telephone).
I've tried the Provider.getAddresses() method, but that only give me the phone numbers (not the description, which I also need) of the telephones that the program controls. I need the telephone and the descriptions of all the phones in the Call Manager (as the button directory from the Cisco IP Communicator does).
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...