We have problem in interfacing the normal billing equipment with ATA.
First we faced problem in polarity reversal. After a long search we cleared that problem by giving some value in the polarity field. But now we are facing a typical problem that is after we disconnect the phone line it takes around 30secs to get a polarity reversal which delays the bill generation by 30 secs. So we need a good solution to over come the problem. What are the values we have to use in the polarity field to over come the problem.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4