If I understandd you correctly and if my memory serves (probably not) you can put a comma in the dial string for a pause. One comma equals about 3 seconds of pause. You can use multiple commas for longer pauses.
From the researching I've done on various forums, including this one, there is not a way to include a pause in the dial string or speed dials. There is a bug, CSCec41905, for the pause in speed dials. I'm assuming that they'll allow a pause in dial strings when they allow the pause in speed dials.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...