Of course, I KNOW that, but that was NOT my question
The question again:how to have a button on the phone that will let you directly in to your mailbox without being prompted for password. The mailbox DO have password. Is it possible to send the password as a string or do something else that solve the problem ??
I know of no way to send the password string for you HOWEVER, you can allow the subscribers to access their voicemail without them having to enter a password. I have to stress that this is NOT recommended.
If you go to Subscribers > Account Policy > Phone Password Restrictions, you can set it up so that Subscribers can have a 'blank' password (Permit Blank Password).
The feature you are asking for is now available in Unity 4.1.1 and can be enabled on a unity account basis to allow a subscriber calling in from the unity extension # or a configured alternate extension to not have to enter the phone password. All other callers into the subscriber account receive the prompt for password.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...