03-28-2007 06:39 PM - edited 03-13-2019 04:02 PM
What HP Servers are supported for upgrades to CallManager 5.1? Are the DL380G5 and the DL320-G4 3.4 GHz the only supported servers? What about upgrades from 4.X?
03-29-2007 05:59 AM
Hi Chad,
That looks correct :) Here are the 3 HP servers currently supported for CCM 5.1 Installations;
HP Server Solutions
HP DL380-G5 Server with Xeon 5140 2.33-GHz Processor
The DL380-G5, which requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1(b) This server does not support Cisco Unified CallManager 5.0.
DL380-G5
Single processor Xeon 5140 2.33 GHz
2500 IP phones
CM5.1-K9-380G5
HP DL380-G5 Server with Dual Xeon 5140 2.33-GHz Processor
The DL380-G5, which requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1(b) This server does not support Cisco Unified CallManager 5.0.
DL380-G5
Dual processor Xeon 5140 2.33 GHz
5000 IP phones
CM5.1-K9-380G5D
HP DL320-G4 Server with Intel 950 3.4-GHz Processor
The DL320-G4, which requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1
DL320-G4
Intel 950 3.4 GHz
1000 IP phones
CM5.1-K9-DL320G4
From this great doc;
http://www.cisco.com/en/US/customer/products/hw/voiceapp/ps378/prod_brochure09186a0080107d79.html
Hope this helps!
Rob
04-29-2007 04:17 PM
We are running a DL320-G4 with a 2.8 or 2.9 GHz processor and it is running 5.1, however if you want to go to 6.0, you'll have to have the 3.4. Luckily I think it's just a processor upgrade so it should be a straight-forward migration from 4.x. We started at 5.0 and upgraded with no issues, however you're looking at a different upgrade experience coming from 4.x.
BTW, good luck getting a DL320 if you're going that route, the G4's are no longer in production and the G5's are not out yet!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: